To Next PageTo Next Page
Need help?Do you have a question about the Milnor 36026X8J and is the answer not in the manual?
General| Model | 36026X8J |
|---|---|
| Category | Washer |
| Brand | Milnor |
| Extract G-Force | 300 G |
| Phase | 3 |
| Frequency | 60 Hz |
| Motor HP | 5 HP |
Details warranty coverage, duration, exclusions, and claims process for Milnor machines.
Provides instructions on ordering replacement parts from Milnor or approved suppliers.
Outlines critical safety requirements, hazards, and precautions for machine operation.
Covers procedures for installing the washer-extractor, including handling and site requirements.
Explains the use and removal of shipping brackets for machine movement and installation.
Details requirements for piped and electrical connections to the machine.
Provides torque values for various fasteners used on Milnor equipment.
Outlines procedures for inspecting and maintaining the machine's disk brake system.
Guides on the correct use, placement, and replacement of safety placards on the machine.
Identifies and illustrates the various panels and covers on the machine.
Covers identification, installation, and components of the machine's drive system.
Details suspension components, installation, and adjustment procedures for machine stability.
Illustrates and lists components related to the machine's shell and door mechanisms.
Explains the layout, components, and installation of water and steam piping systems.
Details components and installation procedures for the water recirculation system.
Covers components and installation for soap chutes and dry chemical supply systems.
Explains components and functions of control and sensing devices on the machine.
Provides a schematic and parts list for the machine's pneumatic systems.
Presents detailed drawings with dimensions for machine installation and specifications.
