Milnor MWF27Z8 Series User Manual

Published Manual Number/ECN: MQCLJO01UU/2015492A
• Publishing System: TPAS2
• Access date: 11/30/2015
• Document ECNs: Latest
MilTouch™
PELLERIN MILNOR CORPORATION POST OFFICE BOX 400, KENNER, LOUISIANA 70063-0400, U.S.A.

Milnor MWF27Z8 Series Specifications

General

Output Voltage	24 VDC
Number of Inputs	16
Input Voltage	120/240 VAC, 50/60 Hz
Communication Ports	RS-485
Operating Temperature	0°C to 55°C

Summary

Chapter 1. How to Use the MilTouch™ Control

1.1. Using the MilTouch™ Control

Guide to operating the MilTouch™ control system via its touch-sensitive display.

1.1.1. The Home Display

Overview of the Home display for running wash formulas.

1.1.2. The Run Display

Monitoring and controlling an active wash cycle.

Chapter 2. How to Update the Machine Software

2.1. MilTouch Update: WUMTGUI/2.1.xxx

Instructions for updating MilTouch machine software.

2.1.2. How do I save my formulas and machine configuration?

Procedure for backing up wash formulas and machine settings.

Chapter 3. MilTouch™ Wash Formulas

3.1. MilTouch Formula Decisions

Understanding the decisions and parameters for programming wash formulas.

3.2. RinSave™ Commercial Laundry Formulas

Details on specific RinSave commercial laundry formulas.

Chapter 4. Troubleshooting

4.1. MilTouch™ and MilTouch-EX™ Error Messages

List and explanation of error messages encountered on the control system.

4.2. Inputs and Outputs for the MilTouch™ Controller

Information on machine inputs and outputs for diagnostics.

4.3. Components of the MilTouch™ Controller Circuit Boards

Identification of processor and I/O boards for troubleshooting.