Pellerin Milnor Corporation
Figure 3. Details C & D: Shell rear to Bearing, Bearing to Pulley
Legend
C. Connection between the cylinder rear and the bearing housing
D. Connection between the bearing housing and the pulley
P. Apply adhesive to the bolt torque to 361 FT. LBS.
Q. Apply adhesive to the bolt, torque to 236 FT. LBS.
R. Key. See Bearing Housing Components, BPWMAB03.
Bearing Installation MWF27
3 of 4
BPWMAB04 / 2017502A
BPWMAB04 0000168667 A.2 12/11/17 3:42 PM Released
66
To Next Page
