Need help?Do you have a question about the Milnor MWT18E4 and is the answer not in the manual?
General| Model | MWT18E4 |
|---|---|
| Manufacturer | Milnor |
| Frequency | 50/60 Hz |
| Enclosure Rating | IP65 front panel |
| Operating Temperature | 0°C to 50°C (32°F to 122°F) |
| Humidity Range | 10% to 90% non-condensing |
Details the E-P OneTouch controller interface, including formula selection, termination, status lights, and door unlock.
Provides step-by-step instructions for loading, starting, and unloading the machine using the E-P OneTouch controls.
Explains the procedure to terminate a running formula and resume operation, including safety delays.
Offers guidelines for correctly loading the machine to prevent damage, considering goods type and machine capacity.
Addresses common errors like Vibration Switch Tripped and Door Open, detailing causes and recovery steps.
Explains the condition where the machine fails to increase speed, often due to a blocked pressure hose or faulty switch.
Covers faults related to door interlocks or inverter issues, including conditions before, during, and after operation.
To Next Page
