Need help?Do you have a question about the Miltenyi Biotec MACSQuant 10 and is the answer not in the manual?
Guidelines for safe operation, minimizing risks, protecting personnel and equipment.
Covers safe operation, contacting support, and general precautions.
Discusses risks from electrical devices and fire prevention.
Warns about the magnet and risks to individuals with medical implants.
Identifies risks from moving parts, such as puncturing or crushing.
Details laser classifications and risks from optical radiation.
Addresses risks from biohazardous materials, chemicals, and waste disposal.
Specifies the instrument's purpose as a benchtop flow cytometer for research.
Procedure for installing or replacing the MACSQuant column.
Steps for attaching the optional MACS MiniSampler Plus.
Procedures for safely shutting down the instrument.
Procedures for calibrating components related to sample aspiration.
Step-by-step guide for calibrating the needle arm's position.
Process for calibrating the instrument's ability to detect racks.
Describes the real-time diagnostic service and how to access it.
Procedures for decontaminating the instrument after use with hazardous materials.
Steps to diagnose and resolve issues with column leakage.
Guidance on addressing leaks from the syringe pumps.
Troubleshooting tips for air bubble issues affecting measurements.
Provides contact information and resources for technical assistance.
Outlines the terms and conditions of the product's limited warranty.
General| Type | Flow Cytometer |
|---|---|
| Number of Parameters | 10 |
| Detection Technology | Fluorescence detection |
| Data Analysis Software | MACSQuantify |
| Carryover | < 0.1% |
| Absolute Cell Counting | Yes |
| Fluorescence Channels | 10 |
| Power Requirements | 100-240 V, 50/60 Hz |
| Laser Wavelengths | 405 nm, 488 nm |
| Sample Input | Tubes, plates |
| Lasers | 4 lasers |
| Sample Volume | 20 µL to 500 µL |
| Data Output | FCS 3.1 |
To Next Page
