Milwaukee 2703-20 User Manual

M18™ FUEL™ 1/2" DRILL/DRIVER AND HAMMER DRILL/DRIVER
PERCEUSE-VISSEUSE ET PERCEUSE À PERCUSSION DE
M18™ FUEL™ 13 mm (1/2")
TALADRO DESTORNILLADOR Y TALADRO DE PERCUSIÓN
DE 13 mm (1/2") M18™ FUEL™
Cat. No.
No de cat.
2703-20
2704-20
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND OPERATOR'S
MANUAL.
AFIN DE RÉDUIRE LE RISQUE DE BLESSURES, L'UTILISATEUR DOIT LIRE ET BIEN
COMPRENDRE LE MANUEL DE L'UTILISATEUR.
PARA REDUCIR EL RIESGO DE LESIONES, EL USUARIO DEBE LEER Y ENTENDER EL
MANUAL DEL OPERADOR.

Milwaukee 2703-20 Specifications

General

Brand	Milwaukee
Model	2703-20
Category	Power Tool
Language	English

Summary

General Power Tool Safety Warnings

Work Area Safety

Safety guidelines for maintaining a clean and safe work environment.

Electrical Safety

Precautions regarding electrical hazards when operating power tools.

Personal Safety

Guidelines for operator protection, including PPE and alertness.

Power Tool Use and Care

Proper methods for using, maintaining, and storing power tools.

Battery Tool Use and Care

Instructions for safe and effective use and maintenance of battery packs.

Specific Safety Rules for Drills and Impact Drills

Safety precautions specific to drilling and hammer drilling operations.

Functional Description and Specifications

Tool Components Overview

Tool Specifications

Assembly Procedures

Battery Pack Installation

Side Handle Installation

Bit Installation and Removal

Operating the Tool

Selecting Drill, Drive, or Hammer Action

How to select the correct operating mode for different tasks.

Selecting Operating Speed

Guidance on choosing between low and high speed settings.

Using the Control Switch

Operation of forward, reverse, and lock functions of the control switch.

Starting, Stopping, and Speed Control

Drilling Technique

Applications Guide

Drilling in Wood, Composition, and Plastic

Drilling in Metal

Drilling in Masonry

Driving Screws and Nut Running

Maintenance and Service

General Maintenance Precautions

Tool Cleaning and Care

Accessory Usage