EasyManua.ls Logo

Milwaukee 2902-20 User Manual

Milwaukee 2902-20
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Cat. No. / No de cat.
2902-20
M18™ BRUSHLESS 1/2" HAMMER DRILL/DRIVER
PERCEUSE À PERCUSSION DE 13 mm (1/2") M18™
TALADRO PERCULOR A PERCUSIÓN DE 13 mm (1/2") M18™
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
Question and Answer IconNeed help?

Do you have a question about the Milwaukee 2902-20 and is the answer not in the manual?

Milwaukee 2902-20 Specifications

General IconGeneral
TypeDrill/Driver
Voltage18V
Chuck Size1/2 inch
Speed Settings2
Power SourceCordless
Motor TypeBrushless
Battery SystemM18
Battery TypeLithium-ion
RPM0-550 / 0-1, 800
No Load Speed0-550 / 0-1, 800 RPM

Summary

General Power Tool Safety Warnings

Work Area Safety

Guidelines for safe operation in the work environment.

Electrical Safety

Precautions related to electrical hazards.

Personal Safety

Recommendations for user safety during operation.

Power Tool Use and Care

Best practices for using and maintaining the tool.

Battery Tool Use and Care

Guidelines for safe battery handling and charging.

Service and Specifications

Service Information

Instructions for tool maintenance, cleaning, and repairs.

Specific Safety Rules for Hammer Drill/Driver

Safety precautions for hammer drill/driver operations.

Specifications and Symbols

Technical details, ratings, and glossary of symbols.

Functional Description and Operation

Assembly Procedures

Guide for assembling the tool, including battery and side handle.

Operating Modes and Bit Installation

How to install bits and select drilling, driving, or hammer modes.

Applications and Operating Techniques

Drilling Applications

Guidance on drilling in wood, metal, and masonry.

Driving Screws and Overloading

Techniques for driving screws and avoiding tool overload.

Maintenance and Warranty

Maintenance and Cleaning

Instructions for keeping the tool in good condition.

Service, Accessories, and Warranty

Information on repairs, optional accessories, and product warranty.

Related product manuals