Milwaukee M18 FUEL 2904-20 User Manual

Cat. No. / No de cat.
2903-20, 2904-20
M18 FUEL™ 1/2" DRILL/DRIVER AND HAMMER DRILL/DRIVER
PERCEUSE-VISSEUSE ET PERCEUSE À PERCUSSION DE
M18 FUEL™ 13 mm (1/2")
TALADRO DESTORNILLADOR Y TALADRO DE PERCUSIÓN
DE 13 mm (1/2") M18 FUEL™
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.

Milwaukee M18 FUEL 2904-20 Specifications

General

Voltage	18V
Motor Type	Brushless
Max Torque	1, 400 in-lbs
Chuck Size	1/2 inch
Power Source	Cordless
Battery System	M18
Battery Type	Lithium-Ion
No Load Speed	0-550 / 0-2, 100 RPM
Tool-Free Chuck	Yes
LED Light	Yes
Max RPM	2, 100 RPM
Length	6.9 inches
Chuck Type	Metal
RPM	0-550 / 0-2, 100 RPM
Blows Per Minute	0-33, 000 BPM

Summary

General Power Tool Safety Warnings

Work Area Safety

Ensures a safe environment by keeping the area clean, well-lit, and free from hazards.

Electrical Safety

Precautions regarding power source, grounding, cords, and exposure to moisture.

Personal Safety

Guidelines for operator alertness, protective equipment, and preventing unintentional starts.

Power Tool Use and Care

Battery Tool Use and Care

Instructions for charging, handling, and maintaining battery packs.

Specific Safety Rules for Drill/Drivers

Safety Instructions for All Operations

Operation

Selecting Drill, Drive, or Hammer Mode

How to choose the correct mode for drilling, driving screws, or hammer drilling.

Selecting Speed and Clutch Settings

Using the Control Switch and Trigger

Starting, Stopping, and Controlling Speed