Milwaukee M18 FUEL 2803-20 User Manual

Cat. No. / No de cat.
2803-20, 2804-20
M18™ FUEL™ 1/2" DRILL/DRIVER AND HAMMER DRILL/DRIVER
PERCEUSE-VISSEUSE ET PERCEUSE À PERCUSSION DE
M18™ FUEL™ 13 mm (1/2")
TALADRO DESTORNILLADOR Y TALADRO DE PERCUSIÓN
DE 13 mm (1/2") M18™ FUEL™
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.

Milwaukee M18 FUEL 2803-20 Specifications

General

Voltage	18V
Motor	Brushless
Max Torque	1, 200 in-lbs
Speed Settings	2
Chuck Size	1/2 inch
RPM	0-550 / 0-2, 000
Battery System	M18
Battery Type	Lithium-Ion
No Load Speed	0-550 / 0-2, 000 RPM
Length	6.9 inches

Summary

General Power Tool Safety Warnings

Work Area Safety

General precautions for maintaining a safe and organized workspace.

Electrical Safety

Guidelines for preventing electric shock when using power tools.

Personal Safety

Recommendations for operator alertness, PPE, and preventing accidental starts.

Power Tool Use and Care

Tool Usage and Maintenance

Battery Tool Use and Care

Specific Safety Rules for Drill/Drivers

General Drill/Driver Safety

Safety instructions for all operations, including ear protection and auxiliary handles.

Long Drill Bit Safety

Precautions when operating with long drill bits to prevent bending or injury.

Assembly Instructions

Battery Pack Installation

Instructions for removing and inserting the battery pack into the tool.

Side Handle Installation

Steps for attaching and securing the side handle for safe operation.

Operation Guide

Installing and Removing Bits

Selecting Drill or Drive Action

Operation Procedures

Mode Selection