To Next PageTo Next Page
Need help?Do you have a question about the Milwaukee 6955-20 and is the answer not in the manual?
General| Power source | AC |
|---|
Guidelines for maintaining a clean and safe work environment.
Precautions for safe electrical usage and grounding of power tools.
Guidelines for user alertness, protective equipment, and preventing unintentional starts.
Ensures proper tool upkeep, sharp blades, and clean handles for safe operation.
Covers tool operation, storage, operator training, and proper use instructions.
Focuses on secure workpiece clamping and safe hand positioning near the blade.
The primary cutting assembly of the miter saw, housing the motor and blade.
Provides precise, real-time display of the set miter angle.
Allows for micro-adjustments to the miter angle for precise setup.
Mechanism used to adjust and lock the saw's bevel angle.
Essential advice for safe and effective use of extension cords outdoors and indoors.
Chart detailing required wire gauge based on amperage and cord length.
Explains the critical safety function and connection of grounded tools.
Safely stops the blade quickly after the trigger is released.
Details the system for collecting and managing sawdust during operation.
Step-by-step instructions for safely replacing the saw blade.
Procedure to ensure the blade is perfectly perpendicular to the fence.
Procedure to ensure the blade is perfectly perpendicular to the table.
How to adjust kerf plates for reduced tear-out and proper blade fit.
Information on the function, maintenance, and proper use of blade guards.
Guidance on choosing suitable workpieces and inspecting for defects.
Detailed steps for setting and fine-tuning miter angles using detents and scales.
Instructions for setting and adjusting bevel angles with detents and scales.
How to set the depth stop for making groove or rabbet cuts.
Guide on performing basic vertical cuts without using the sliding feature.
Instructions for making cuts on wider workpieces using the sliding mechanism.
Technique for cutting crown molding pieces laid flat on the saw table.
Method for cutting crown molding using the fence without bevel adjustments.
Guidance on correctly positioning crown molding for specific corner types.
Regular checks and maintenance for optimal tool performance and longevity.
Instructions for cleaning the tool safely and effectively using appropriate methods.
