Milwaukee 6390 User Manual

HEAVY-DUTY CIRCULAR SAW WITH TILT-LOK™ HANDLE
SCIES CIRCULAIRES INDUSTRIELLES AVEC POIGNEE « TILT-LOK™ »
SIERRA CIRCULAR PARA TRABAJO PESADO CON EMPUÑADURA
TILT-LOK™ (INCLINABLE-FIJABLE)
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND OPERATOR'S MANUAL.
AFIN DE RÉDUIRE LE RISQUE DE BLESSURES, L'UTILISATEUR DOIT LIRE ET BIEN COMPRENDRE LE
MANUEL DE L'UTILISATEUR.
PARA REDUCIR EL RIESGO DE LESIONES, EL USUARIO DEBE LEER Y ENTENDER EL MANUAL DEL
OPERADOR.
Catalog No.
No de Cat.
Catálogo No.
6390
6394

Milwaukee 6390 Specifications

General

Blade Diameter	7-1/4 inches
Amperage	15 amps
No Load RPM	5, 800 RPM
Bevel Capacity	50 degrees
Voltage	120 V
Depth of Cut at 90°	2-7/16 inches
Arbor Size	5/8 inches
Cord Type	Fixed
Depth of Cut at 45°	1-13/16 inches

Summary

General Safety Rules

Electrical Safety

Instructions for safe use of power and grounding.

Personal Safety

Precautions for operator well-being and safe handling.

Tool Use and Care

Best practices for operating and maintaining the tool.

Service Requirements

Specific Safety Rules for Circular Saws

Kickback Causes and Prevention

Explains how to avoid dangerous saw kickback situations.

Grounding and Electrical Connections

Grounded Tools

Double Insulated Tools

Extension Cords

Guidelines for selecting and using appropriate extension cords.

Functional Description

Tool Assembly and Blade Installation

Blade Selection and Installation

Guidance on choosing and fitting saw blades safely.

Installing and Removing Blades

Detailed steps for blade removal and installation.

Depth Adjustment

Adjustments and Settings

Adjusting Bevel Angle

Adjusting Tilt-Lok Handle

Adjusting Blade to Shoe

Circular Saw Operation

General Operation Procedures

Basic steps and precautions for using the circular saw.

Troubleshooting

Cutting Techniques

Ripping and Cross-Cutting Wood

Maintenance

Maintaining Tools

Tool Repairs