To Next PageTo Next PageWhy does the Milwaukee Saw blade bind, smoke, or turn blue?
The blade may bind, smoke, or turn blue from friction for several reasons: * The blade is dull. * The blade is on backwards. * The blade is bent. * The blade is dirty. * The workpiece is not properly supported. * The incorrect blade is being used.
Ensures a safe work environment by keeping the area clean and free from hazards.
Covers precautions for safe electrical connection and use of power tools.
Details essential personal safety measures for operating power tools.
Explains the causes of kickback and provides operator prevention techniques.
Instructions for grounding tools with three-prong plugs and double insulated tools.
Provides advice on selecting and using appropriate extension cords for safety.
Details on preventing kickback while operating the saw.
Identifies common problems and their potential solutions.
Ensures a safe work environment by keeping the area clean and free from hazards.
Covers precautions for safe electrical connection and use of power tools.
Details essential personal safety measures for operating power tools.
Explains the causes of kickback and provides operator prevention techniques.
Instructions for grounding tools with three-prong plugs and double insulated tools.
Provides advice on selecting and using appropriate extension cords for safety.
Details on preventing kickback while operating the saw.
Identifies common problems and their potential solutions.
General| Model | 6391 |
|---|---|
| Category | Saw |
| Type | Circular Saw |
| Voltage | 120V |
| Amps | 15 |
| No Load Speed | 5800 RPM |
| Blade Diameter | 7-1/4 inches |
| Arbor Size | 5/8 inches |
| Depth of Cut at 90° | 2-7/16 inches |
| Weight | 10.4 lbs |
| Spindle Lock | Yes |
| Blade Position | Right |
| Depth of Cut at 45° | 1-13/16 inches |
| Bevel Capacity | 50° |
| Cord Type | Fixed |
