Milwaukee 6370-20 User Manual

TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND OPERATOR'S
MANUAL.
AFIN DE RÉDUIRE LE RISQUE DE BLESSURES, L'UTILISATEUR DOIT LIRE ET BIEN
COMPRENDRE LE MANUEL DE L'UTILISATEUR.
PARA REDUCIR EL RIESGO DE LESIONES, EL USUARIO DEBE LEER Y ENTENDER EL
MANUAL DEL OPERADOR.
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
Cat. No.
No de cat.
6370-20
6370-21
8" METAL CUTTING SAW
SCIE À MÉTAUX 203 mm (8")
SIERRA DE 203 mm (8") PARA CORTAR METAL

Milwaukee 6370-20 Specifications

General

Type	Reciprocating Saw
No Load Speed	0-2, 800 SPM
Weight	7.5 lbs
Blade Clamp	Keyless
Variable Speed	Yes
Voltage	120V
Tool Weight	7.5 lbs
Cord Type	Corded
Stroke Length	1-1/8 inches

Summary

General Power Tool Safety Warnings

Work Area Safety

Electrical Safety

Precautions related to the electrical aspects of the tool.

Personal Safety

Guidelines for user's personal safety during operation.

Power Tool Use and Care

Specific Safety Rules

Cutting Procedures

Safety guidelines specific to the cutting operation.

Lower Guard Function

Instructions on checking and using the lower guard.

Grounding and Extension Cords

Grounding

Explanation of grounding requirements for tools.

Extension Cords

Guidelines for selecting and using extension cords.

Recommended Minimum Wire Gauge For Extension Cords

Assembly and Adjustments

Selecting Blade

Checking the Operation of the Lower Guard

Procedure to check the lower guard's functionality.

Installing and Removing Blades

Instructions for safely changing the saw blade.

Adjusting Depth

How to set the cutting depth of the saw.

Operation

Kickback Causes and Related Warnings

Detailed explanation of kickback and its prevention.

General Operation

Step-by-step guide for operating the saw.

Tool Operation and Applications

Overload Protector

Cutting Materials Thicker than 1/4"

Cutting Large Sheets

Pocket Cutting