Milwaukee FORCE LOGIC M18 - Compatibility Charts; Milwaukee Tool + Competitive Punches and Dies

Compatibility Charts
Milwaukee
®
Tool + Competitive Punches and Dies
MILWAUKEE TOOL PLUS COMPETITIVE PUNCHES & DIES
Size
Greenlee Slug-Busters
(1/2" – 2") and Standard
(2-1/2" – 4")
Greenlee Slug Splitter
Punches and Dies
Greenlee SPEED
PUNCH
™
Punches
and Dies
Maxis Max Punch
Pro Stainless Steel
Punches and Dies
Maxis
Max
Punch
1/2" MS
YES, with small
Greenlee spacer
–
YES, with small
Greenlee spacer
– YES
1/2" SS –
YES, with small
Greenlee spacer
–
YES, with small draw
stud and small spacer
–
3/4" YES
YES, with small
Greenlee spacer
YES, with small
Greenlee spacer
YES, with small spacer YES
1" YES
YES, with small
Greenlee spacer
YES, with small
Greenlee spacer
YES, with small spacer YES
1-1/4" YES YES
YES, with small
Greenlee spacer
YES, with small spacer YES
1-1/2" YES YES
YES, with small
Greenlee spacer
YES YES
2" YES YES
YES, with small
Greenlee spacer
YES YES
2-1/2" YES YES
YES, with small
Greenlee spacer
YES YES
3" YES YES
YES, with small
Greenlee spacer
YES YES
3-1/2"
YES + MILWAUKEE
®
adaptor
49-16-2685
YES + MILWAUKEE
®
adaptor 49-16-2685
YES YES YES
4"
YES + MILWAUKEE
®
adaptor
49-16-2685
YES + MILWAUKEE
®
adaptor 49-16-2685
YES YES YES
**COMPETITIVE PUNCHES MUST BE USED IN TRADITIONAL KNOCKOUT FORM. MILWAUKEE
®
QUICK
CONNECT ALIGNMENT SYSTEM IS FOR USE WITH EXACT
TM
PUNCHES AND DIES ONLY
**COMPETITIVE DRAW STUDS ARE RECOMMENDED FOR USE WITH COMPETITIVE PUNCHES AND DIES
4