Why is my Milwaukee M18 FCHS bar and chain running hot and smoking?
Your Milwaukee Chainsaw bar and chain might be running hot and smoking because the chain tension is too tight, or the chain oil reservoir is empty. To resolve this, correct the chain tension and fill the oil reservoir.
What to do if Milwaukee M18 FCHS motor runs, but chain is not rotating?
If the motor of your Milwaukee Chainsaw runs but the chain isn't rotating, it could be due to several reasons. The chain tension might be too tight, the guide bar and chain may be improperly assembled, or the guide bar or chain could be damaged. To fix this, correct the chain tension, ensure proper assembly, and replace any damaged parts before using the chainsaw.
General| Battery Voltage | 18V |
|---|---|
| Power Source | Battery |
| Oil Tank Capacity | 200 ml |
| Bar Length | 16 inches |
| Recommended Battery | M18 REDLITHIUM |
| Chain Pitch | 3/8 inches |
| Chain Gauge | 0.05 inches |
To Next Page
