What to do if the motor runs, but the chain is not rotating on my Milwaukee Pole Saw?
If the motor of your Milwaukee Pole Saw runs but the chain doesn't rotate, it could be due to a chain tension that is too tight, improper assembly of the guide bar and chain, or damage to the guide bar or chain. Correct the chain tension, ensure proper assembly, and replace any damaged parts before use.
Why is my Milwaukee M18 FOPH-CSA Pole Saw bar and chain running hot and smoking?
If the bar and chain of your Milwaukee Pole Saw are running hot and smoking, it might be due to overtightened chain tension or an empty chain oil reservoir. Correct the chain tension and fill the oil reservoir to resolve this issue.
General| Brand | Milwaukee |
|---|---|
| Model | M18 FOPH-CSA |
| Category | Pole Saw |
| Power Source | Battery |
| Voltage | 18V |
| System | M18 |
| Chain Gauge | 0.043 inches |
| Battery Compatibility | M18 |
| Bar Length | 10 inches |
| Chain Pitch | 3/8 in |
Essential safety instructions for operating the cordless pole saw.
Strategies to mitigate risks associated with tool vibration exposure.
Essential safety gear for operating the pole saw.
Proper methods for cutting branches and logs.
General safety guidelines for product operation and maintenance.
Regulations and precautions for transporting battery packs.
Understanding potential hazards and intended product use.
To Next Page
