Milwaukee M18 FUEL 49-16-2720 User Manual

Cat. No. / No de cat.
49-16-2720
M18 FUEL™ 10" POLE SAW ATTACHMENT W/ QUIK-LOK™
ACCESSOIRE DE SCIE A LONG MANCHE DE 254 mm (10")
M18 FUEL™ AVEC QUIK-LOK™
ACCESORIO DE LA SIERRA DE PÉRTIGA DE 254 mm (10")
M18 FUEL™ CON QUIK-LOK™
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR

Milwaukee M18 FUEL 49-16-2720 Specifications

General

Brand	Milwaukee
Model	M18 FUEL 49-16-2720
Category	Pole Saw
Language	English

Summary

General Power Tool Safety Warnings

Work Area Safety

General safety rules for the work environment.

Electrical Safety

Safety precautions related to electrical hazards.

Personal Safety

Safety measures for the operator's well-being.

Power Tool Use and Care

Guidelines for using and maintaining power tools.

Battery Tool Use and Care

Guidelines for using and maintaining battery-powered tools.

Specific Safety Rules for Pole Saw

Kickback Prevention

Explains causes and operator prevention of kickback.

Other Safety Rules

Operator Preparedness and Awareness

Covers proper dress, alertness, and avoiding fatigue.

Chemical Dust Hazard Warning

Warning about hazardous chemicals in dust.

Specifications

Functional Description

Symbology

Assembly

Replacing and Adjusting Saw Chain and Bar

Instructions for replacing and adjusting the saw chain and bar.

Attaching the Shoulder Strap

Chain Oil

Filling the Oil Reservoir

Step-by-step guide to filling the chain oil reservoir.

Transporting Tool

Selecting the Speed

Operation

Cutting Near Power Lines

Critical warning about cutting near power lines.

Understanding Instructions

Emphasizes understanding all instructions to avoid hazards.

Kickback Hazards

Explains kickback phenomenon and its dangers.

Minimizing Kickback

Proper Grip and Stance

Guidelines for firm grip, body positioning, and balance.

Cutting Technique

Advice on push/pull reaction and using correct chain speed.

Turning the Tool On/Off

Proper Cutting Stance

Basic Cutting Procedure

Work Area Precautions

Safety measures for the work area and personnel.

Pruning

Limbing

Maintenance

Maintaining Tool

Regular maintenance program for tools, batteries, and chargers.

Chain and Bar Care

Cleaning and maintaining the guide bar and chain.

Sharpening the Saw Chain

Instructions and warnings for sharpening the saw chain.

Troubleshooting

Chain Filing Guide

Depth Gauge Clearance

Procedure for checking and adjusting depth gauge clearance.

Guide Bar Maintenance

Tips for maintaining and replacing the guide bar.

Cleaning

Accessories

Service - United States

Service - Canada

Limited Warranty USA & Canada

Limited Warranty - Mexico, Central America & Caribbean

Procedure to Make Warranty Valid

Steps to ensure the warranty is valid.

Exceptions

Situations where the warranty is not valid.