To Next PageTo Next PageWhat to do if the Milwaukee Pole Saw motor runs, but the chain is not rotating?
If the Milwaukee Pole Saw's motor runs but the chain doesn't rotate, it could be due to several reasons. First, check the chain tension, as it might be too tight. Second, ensure the guide bar and chain are assembled correctly. Finally, inspect the guide bar and chain for any damage and replace any damaged parts.
Why is the bar and chain running hot and smoking on my Milwaukee M18 FUEL HATCHET 3004-20?
If the bar and chain of your Milwaukee Pole Saw are running hot and smoking, it may be due to the chain oil reservoir being empty or the chain tension being too tight. Make sure to fill the oil reservoir.
General precautions for the work environment to prevent accidents.
Precautions related to electrical hazards and shock prevention.
Personal safety measures during operation, including alertness and PPE.
Important safety guidelines for general pruning saw use.
Explains kickback and provides methods to avoid it.
Steps to keep cutting jobs free from accident or injury.
Warning about dangerous springpoles and how to handle them.
Causes and solutions for overheating bar and chain.
Diagnosing and fixing issues with chain rotation.
Instructions for safely sharpening the saw chain.
General
