Need help?Do you have a question about the Milwaukee M18 ONEFHIWF34 and is the answer not in the manual?
General| Voltage | 18V |
|---|---|
| No Load Speed | 0-1, 800 RPM |
| Impacts per Minute | 0-850 / 0-1850 / 0-2100 IPM |
| Speed | 0-1, 800 RPM |
| Battery Type | M18 REDLITHIUM |
| Chuck Type | 1/4 inch hex |
Provides detailed specifications including no-load speed, torque, bolt capacity, and battery voltage.
Presents A-weighted noise levels and total vibration values determined according to EN 62841.
Manufacturer's declaration that the product complies with relevant EU regulations and harmonized standards.
General safety warnings and instructions for power tool usage, including electric shock and injury risks.
Specific safety advice for impact drivers, focusing on insulated gripping surfaces and wiring contact.
Covers protective equipment, dust protection, handling stalled tools, and burn dangers.
Instruction to wear ear protection due to noise exposure from the tool.
Details declared vibration emission levels for impact tightening and tool uncertainty.
Instructions on how to change tool modes and use the ONE-KEY App for advanced settings.
Information on accessing ONE-KEY features via app and troubleshooting ESD issues.
Details on tool shutdown mechanisms for extreme torque, binding, stalling, and short circuit situations.
Information on using Milwaukee accessories, obtaining spare parts, and service agent contact.
Explanation of warning symbols and instructions for environmentally compatible recycling of tools and batteries.
To Next Page