Why does the Milwaukee Saw blade bind, smoke, or turn blue?
Your Milwaukee Saw blade might bind, smoke, or turn blue due to several reasons: * The blade is dull. * The blade is on backwards. * The blade is bent or dirty. * The workpiece isn't properly supported. * The wrong blade is in use. * The battery charge is low.
Precautions to prevent electric shock, including proper plug use and avoiding wet conditions.
Instructions for staying alert, using PPE, and preventing unintentional starts.
Guidelines for charging, using, and maintaining battery packs safely to prevent hazards.
Key safety precautions specific to operating the rotary hammer.
Specific warnings for battery safety to prevent fire, injury, or product damage from short circuits.
Routine inspection, care, and cleaning instructions for the tool, battery, and charger.
Precautions to prevent electric shock, including proper plug use and avoiding wet conditions.
Instructions for staying alert, using PPE, and preventing unintentional starts.
Guidelines for charging, using, and maintaining battery packs safely to prevent hazards.
Key safety precautions specific to operating the rotary hammer.
Specific warnings for battery safety to prevent fire, injury, or product damage from short circuits.
Routine inspection, care, and cleaning instructions for the tool, battery, and charger.
General| Motor Type | Brushless |
|---|---|
| Voltage | 18V |
| LED Light | Yes |
| Battery System | M18 |
| Chuck Type | 1/4" Hex |
| Max Torque | 2, 000 in-lbs |
| Drive Control | 4-Mode |
| IPM | 0-4, 000 IPM |
| Battery Compatibility | M18 |
To Next Page
