Mima xari - Carrycot Removal and Adjustment; Stage 2: Toddler Seat; Safety Harness Setup

10
17. Remove carrycot
Press the two buons on both sides of the carrycot and
li it o.
18. Adjust height of carrycot
• There are two height posions for the carrycot.
Press the height adjustment buons on both sides of the
chassis and move the carrycot up or down.
19. Collapse carrycot
Remove the maress and the safety bar. Release the
sideaps from the carrycot frame. Open the seat and
posion the collapsed carrycot inside the seat. Align the
angle adjustment lever with the hole in the rear shell of
the seat. Make sure the seat brackets are clear of the
seat.
STAGE 2: TODDLER
SAFETY HARNESS
• Whenever a child is placed in the seat, ensure that the
safety harness is correctly ed.
• The shoulder straps can be set at two dierent height
posions. Choose the posion closest to the top of the
child´s shoulders.
20. Set up harness
Take each harness aachment and slide o the boom
secon. Push the harness aachment through its
corresponding hole in the seatpad and the seat. Zip the
seat open and slide the boom part onto the harness
aachment from the inside of the seat unl it clicks into
place.
21. Buckle up
Push the shoulder strap buckles into the buckle slot unl
it clicks. Pull the loose ends on the shoulder straps to t
the harness snugly around the child.
20
21
19
17 18