MIMAC SUPREMA - MOULD DISASSEMBLY AND CLEANING

USE AND MAINTENANCE MANUAL
53
7.3.1. TABLE OVERTRAVEL ALARM: RESETTING INSTRUCTIONS
 Press the icon to access the manual movements page.
 Press the enable push-button.
 Identify the Table field.
 If the "Table overtravel alarm (top)" cuts in, press the icon together with the start push-button.
 If the "Table overtravel alarm (bottom)" cuts in, press the icon together with the start push-button.
 Keep the icon and the start push-button pressed until the alarm message disappears from the notification area.
NOTIFICATION AREA