MIMAKI TS300P-1800 - Connecting Cables; Feed and Quality Adjustments

Mimaki Europe B.V.
Textile and Apparel Products
Higher print gap with high quality output
• Accurate dot placement even when using a higher print head gap
• The new print head fires ink droplets with a higher speed
• The ink drops are fired straight onto the fabric, even when printing with a larger head gap
• Recommended head gap for the best print results is 3mm
9
Older generation printer TS300P-1800
Ink
ejection
Printed
image
7mm
Ink drops deviate by high head gap printing
Ink drops are fired straight even with a high head gap
Inaccurate dot placement.
Blurry edge and
grainy appearance.
Accurate dot placement.
Sharp edges .
7mm