Mimaki Europe B.V.
Textile and Apparel Products
MAPS
• MAPS, Mimaki Advanced Pass System
• MAPS creates stable printing
• MAPS eliminates banding by ejecting ink sparsely at the
boundary of a pass
13
Print solit by each pass
Print sparsely at the boundary
MAPS OFF MAPS ON
Scan
Direction
Feed
Direction
• Setting up MAPS!
• MAPS setting values: -50 to +50
• Boundary between each pass is wider by
larger setting values(+): White banding
would occur.
• Boundary between each pass is narrower by
smaller setting values (-): Print speed is
decreased.
• When MAPS setting value is “‐10”, preset
printing speed is decreased by 10%
To Next Page
Loading...
