7
1
Remove the lower part of the left side front cover,
and shift the flushing unit to the left.
• Refer to the Step 1 to 2 of Chapter 4 “Cleaning the Flusing
BOX Sensor” of the user’s manual to perform the operation.
2
Clean the part of the sensor with a clean stick.
• Wipe off the ink of the sensor with clean stick dipped in
cleaning solution for maintenance.
(5) Ink receiving sponge (“Cleaning the ink receiving sponge” Chapter 4 of the Opera-
tion Manual)
1
Remove the lower part of the left side front cover,
and shift the flushing unit to the left.
• Refer to the Step 1 to 2 of Chapter 4 “Cleaning the Flusing
BOX Sensor” of the user’s manual to perform the operation.
2
Remove the flushing cover, and take out the ink
receiving sponge.
• For detail, refer to step 2 of “Cleaning the ink receiving
sponge” of the user’s manual to perform the operation.
3
Soak the ink receiving sponge in tap water, and
lightly rubbing wash.
• Please ask the industrial waste treatment company for the
waste liquid treatment of the waste that washed the sponge.
4
Return the flushing unit to its original state.
To Next Page
Loading...
