Assembly Tools Required (Not Supplied):
8’ Ladder x 1 / 6’ Ladder x2 / Tape Measure / L-Square Rule / Carpenters Water Level Rule / Drill /
Hammer /Screwdriver or Power Screwdriver / Safety Glasses / Hard Hat / Safety Gloves
Below symbols are placed at the top of each page as a guide
for what may be required.
x3
Use ladder(s).
Some steps are required
for at least 2-4 adults for
erecting.
Use hammer to secure
stakes into ground.
Use tape measure to make
sure the distances between
posts are correct.
Use L-square rule to make
sure the parts positions are
correct.
Use level rule to make sure
the crossbars are level.
When fastening the screw to wood part, set the function to lower
speed, pre-drill a small hole for positioning and preventing screw
slanted or wood cracking.
3
To Next Page
Loading...
