5
about 6 seconds until the headset indicator flashes red and blue, it shows
that the device is now under the search pairing state.
2. Turn on the Bluetooth function on mobile phone #1 and find the
headset name in the search, select the headset to complete the
connection.
3. Switch off the Bluetooth function on mobile phone #1 and long press
the MFB key on headset until the red light of indicator is on, the headset is
now shut down.
4. Turn on the Bluetooth headset again and start the searching and paring
state.
5. Turn on the Bluetooth function on mobile phone #2 and find the
headset name in the search, select the headset to complete the
connection.
6. Now you can turn on the Bluetooth function on mobile phone #1 and
reconnect it to the headset. So you can use your headset on both of your
mobile phones.
Keep your Bluetooth headset close to your phone. The block-free distance
between the headset and your mobile is 10 meters, the sound quality
might decrease or even break if beyond this distance.
Explanation of headset re-connection:
1. Your Bluetooth headset would automatically try to reconnect the last
connection.
2. If your Bluetooth headset does not reconnect, please press the MFB key
the device once or manually go through the Bluetooth menu on your
mobile phone to reconnect the device.
Restore factory settings
1. Press and hold the MFB key for 3 seconds during charging until the
indicator flash red and blue 3 times the device is then restore the default
settings.
To Next Page
Loading...