Batteries
On-screen battery symbols indicate the battery status as follows:
indicates that batteries are working normally. The solid portion represents the
current charge level of the batteries as a percentage of its maximum charge level.
indicates that the batteries have low charge level and need to be charged.
indicates that the batteries are almost depleted and need to be charged
immediately.
Indicates that no batteries are installed or only one battery is installed to the
BeneView T8 or BeneView T9 monitor.
Note
:
Take out the battery before transport or storage to avoid damaging the battery.
Keep the battery out of children’s reach.
Use only specied batteries.
Do not disassemble batteries, or dispose of them in re, or cause them to short circuit. They may ignite, explode,
or leak, causing personal injury.
To Next Page
Loading...
Need help?
General
