Mindray BeneView T5 - Service Manual

Other manuals for Mindray BeneView T5

Questions and Answers:

S
Stacey GrantSep 10, 2025
How to troubleshoot CF card issues on Mindray Heart Rate Monitor?
- T
  Tammy AvilaSep 10, 2025
  If your Mindray Heart Rate Monitor's CF card is malfunctioning, ensure you are using a SanDisk-manufactured CF storage card, preferably with 1GB of memory. If the card is full, has data errors, or is experiencing other errors, format it on a PC. If problems persist, the CF card, the CF card board, or the motherboard may be failing and require replacement. Also, verify the cable between CF card board and motherboard is correctly connected and undamaged.
C
Carmen AdamsAug 23, 2025
What to do if Mindray BeneView T5 Heart Rate Monitor has no printout?
- A
  Anthony ThompsonAug 23, 2025
  If your Mindray Heart Rate Monitor is not printing, check the following: 1. Verify the recorder module is enabled, checking the recorder status LED. 2. Ensure the paper roll is correctly installed. 3. Check the cable connection between the recorder and the motherboard for proper connection and damage. 4. Verify the power module outputs 5V DC and 12V DC correctly. If these steps don't resolve the issue, the recorder itself may need replacement.
C
charles46Aug 25, 2025
Why there is no alarm sound on my Mindray BeneView T5 Heart Rate Monitor?
- M
  michaelturnerAug 25, 2025
  If your Mindray Heart Rate Monitor's alarm lamp is lit but there's no sound, first, check if the audio alarm is disabled in the settings menu under [Main Menu]?[Maintenance >>]? [User Maintenance >>]?enter the required password?[Alarm Setup >>], and then in the popup menu, set [Minimum Alarm VolumeAlm Sound] to appropriate setting.[On] In the [Others] window of the [Alarm Setup] menu, set [Alm Volume] to appropriate setting.. Also, inspect the cable between the speaker and the motherboard for proper connection and damage. If the issue persists, consider that there might be an FPGA audio logic error (requiring an upgrade), a speaker failure, or a motherboard failure, each necessitating component replacement or further action.
J
Jennifer PriceAug 27, 2025
Why is the display blank on my Mindray BeneView T5?
- C
  Craig LeeAug 27, 2025
  If the integrated display on your Mindray Heart Rate Monitor is blank but the monitor functions correctly, check the cable from the display to the motherboard and the cables from the backlight board to the button board and the display for secure connections and any damage. If the connections are good, the backlight board, power module, or the display itself may be defective and require replacement.
L
Lauren Pearson MDAug 27, 2025
How to fix Mindray BeneView T5 Heart Rate Monitor battery that won't recharge?
- N
  Nicole JuarezAug 28, 2025
  If the battery on your Mindray Heart Rate Monitor cannot be recharged, the following steps are recommended. First, replace the battery and attempt to recharge the new battery to determine if the original battery is faulty. Also, check the cable between the battery interface board and the power module for proper connection and any damage. If the issue persists, the power board may be defective and require replacement.
A
Ashley TurnerAug 29, 2025
How to improve print quality on Mindray BeneView T5 Heart Rate Monitor?
- L
  Lisa HesterAug 29, 2025
  If your Mindray Heart Rate Monitor is experiencing poor print quality or paper feed issues, first, stop the recorder and reinstall the paper roll correctly. Inspect the thermal print head and paper roller for any foreign matter, and clean the print head with a suitable cleaning solution. If the problem persists, the print head or the recorder itself may be failing and require replacement.
L
larrywilsonSep 18, 2025
Why does Mindray Heart Rate Monitor show different battery voltages?
- B
  Brad DaviesSep 18, 2025
  If your Mindray Heart Rate Monitor is showing different battery voltages, replace the battery. Also, check that the cable between the battery interface board and power module is correctly connected and that cables and connectors are not damaged. If the issue persists, the power board may be failing and require replacement.
A
Adam KleinSep 12, 2025
What to do if the knob doesn't work on Mindray Heart Rate Monitor?
- J
  Jennifer MatthewsSep 12, 2025
  If the knob on your Mindray Heart Rate Monitor is not working, check the cables from the knob to the button board, and from the button board to the motherboard, ensuring they are properly connected and undamaged. If the connections are good, the knob encoder or the button board may be failing and require replacement.
L
Lindsey WardSep 8, 2025
Why does Mindray BeneView T5 display snow on secondary screen?
- J
  Jordan NavarroSep 8, 2025
  If the secondary display of your Mindray Heart Rate Monitor shows snow or flashing specks, check the cable between the display and the patient monitor for secure connection and any damage. If the connection is good, the DVI interface board or the motherboard may be defective, requiring replacement.
A
Angela TownsendSep 5, 2025
What causes alarm lamp malfunction on Mindray BeneView T5 Heart Rate Monitor?
- C
  Cameron TapiaSep 5, 2025
  If the alarm lamp on your Mindray Heart Rate Monitor is not lighting up or is extinguished while the alarm sound is active, check the cables from the alarm LED board to the button board and from the button board to the motherboard for proper connections and any damage. If the connections are good, the alarm LED board, button board, or motherboard may be faulty and require replacement.