Mindray BeneView T5 Service Manual

3-4
Electrical
safety tests
Refer to A Electrical
Safety Inspection.
1. Following any repair or replacement
2. After the monitor drops.
3. At least once every two years.
Other Tests
Power on test
1. When first installed or reinstalled.
2. Following any maintenance or the replacement of
any main unit parts.
Touchscreen
calibration
/
1. When the touchscreen appears abnormal.
2. After the touchscreen is replaced.
Recorder check / Following any repair or replacement of the recorder.
Network print test /
1. When first installed.
2. Whenever the printer is serviced or replaced.
Functionality
test
1. When first installed.
2. Whenever a battery is replaced.
Battery check
Performance
test
Once a year or if the battery run time reduced
significantly.
3.2 Preventative Maintenance Procedures
3.2.1 Visual Inspection
Inspect the equipment for obvious signs of damage. The test is passed if the equipment has no
obvious signs of damage. Follow these guidelines when inspecting the equipment:
 Carefully inspect the case, display screen, buttons and knob for obvious signs of
damage.
 Inspect the SMR and parameter modules for obvious signs of damage.
 Inspect the power cord, wall-mount bracket and module accessories for obvious signs of
damage
 Inspect all external connections for loose connectors, bent pins or frayed cables.
 Inspect all connectors on the equipment for loose connectors or bent pins.
 Make sure that safety labels and data plates on the equipment are clearly legible.

Mindray BeneView T5 Specifications

General

Brand	Mindray
Model	BeneView T5
Category	Heart Rate Monitor
Language	English