2-2
2.2 System Connections
2.2.1 Mounting the Patient Monitor
The patient monitor can be mounted on a wall bracket or on a trolley support. The wall
bracket or trolley support can be ordered optionally. Each type of mounting bracket is
delivered with a complete set of mounting hardware and instructions. Refer to the
documentation delivered with the mounting hardware for instructions on assembling mounts.
CAUTION
z Not using screw and bracket specified by Mindray may cause the screw to touch
the internal battery and lead to monitor damage (the proper screw depth should be
between 6.5mm and 7.5mm). Take out the rubber stoppers in the two screw holes
of the base when installing the tray.
z The mounting bracket should be installed by our qualified service personnel, or
engineers who have adequate knowledge on it.
z If other mounting solution is used, the installation personnel and the customer
should verify if it can be safely used on the patient monitor, and the customer
assume the responsibility for any risk resulting from that.
To Next Page
Loading...
