To Next PageTo Next Page
Need help?Do you have a question about the Minebea Intec Maxxis 4 and is the answer not in the manual?
General| Protection type | IP65 |
|---|---|
| Display | LCD with backlight |
| Operating temperature | -10 °C to +40 °C |
| Protection class | IP65 |
| Display Type | LCD |
| Housing material | Stainless steel |
| Interfaces | RS232, RS485, Ethernet, USB |
| Approvals | OIML |
| Type | Weight Controller |
| Power supply | 100-240V AC, 50/60Hz |
Covers mandatory instructions and copyright restrictions.
Explains formatting for instructions, lists, menus, and safety signals.
Defines DANGER, WARNING, and CAUTION signal words.
Provides contact details for support and inquiries.
General safety guidelines and device compliance.
Specifies the device's intended applications and user qualifications.
Procedure for checking consignment and detecting transport damage.
Actions required before the device is first used.
Overview of the device's display, keypad, and programming capabilities.
Details the device's features, connections, and expansion options.
Details housing specifications, physical dimensions, and cut-out requirements.
Identifies display elements and operating keys on the device front.
Lists and describes available device connections and plug-in cards.
Details combinations of options and device version marking.
Provides essential safety and procedural information for installation.
Covers cabinet preparation, device installation, and cable management.
Guidelines for ensuring electromagnetic compatibility during installation.
Details main board, LEDs, ports, slots, and interfaces of the device.
Details various interface cards like RS-485, RS-232, Analog I/O, and weighing electronics.
Covers Profibus DP, DeviceNet, CC-Link, Profinet I/O, and EtherNet/IP interfaces.
Guidelines for maintenance work and handling device defects.
Details for date/time and power supply rechargeable batteries.
Instructions for replacing plug-in cards and coding terminal connections.
Procedures for replacing SD card, device, and related data transfer.
Prohibition of soldering and guidelines for safe device cleaning.
Instructions for proper disposal of the product and its packaging.
Details on free software licenses and serial number interpretation.
Covers date/time backup, power battery, and display specifications.
Details power connections, operating limits, and environmental factors.
Lists EMC compliance data for housing and signal lines.
Covers interference suppression, design, dimensions, and weight.
Information on calibration documentation and further setup details.
Lists various compliance and examination certificates for the device.
