Minebea Intec Maxxis 5 - User Manual

Process Controller Maxxis 5 PR 5900
Operating Instructions
Translation of original operating instructions 9499 050 59900 Edition 6.1.1 02/26/2018
Release 2.26.xx-Exx
Minebea Intec GmbH, Meiendorfer Str. 205 A, 22145 Hamburg, Germany
Phone: +49.40.67960.303 Fax: +49.40.67960.383

Minebea Intec Maxxis 5 Specifications

General

Protection type	IP65
Model	Maxxis 5
Manufacturer	Minebea Intec
Power Supply	24 VDC
Storage Temperature	-20 °C to +60 °C
Protection Class	IP65
Interfaces	RS232, RS485, Ethernet, USB
Approvals	OIML
Type	Weight controller
Operating Temperature	-10 °C to +40 °C
Humidity	Up to 90% non-condensing
Housing material	Stainless steel 1.4301 (AISI 304)

Summary

Introduction

Safety and Support Information

Explanation of safety instructions and contact information for technical support.

Commissioning

Display and Control Panel Overview

Data Security and Device Setup

Covers data storage, power handling, and initial device setup procedures.

Device Operation Methods

Overwrite Protection

Blackbox Device Connection

Operation and Control

User Management and Login Procedures

Procedures for user login, logout, management, and changing user settings.

Alibi Memory and Data Management

Managing Alibi memory, viewing calibration data, and accessing website functions.

Backup and Restore Operations

Procedures for backing up and restoring device setup data.

BIOS BOOT Menu Operations

System Setup

Device Connections and Parameters

Weighing Point Configuration

Assigning and configuring weighing electronics and scale types for up to four points.

User Management and Alibi Memory

Managing users, creating/removing accounts, and configuring Alibi memory.

System Maintenance

Backup, Restore, and Data Management

Procedures for backing up, restoring, exporting, and importing device data.

SD Card and USB Stick Operations

Software Update Procedures

Procedures for updating device software via company network, SD card, USB, or FlashIt!.

Factory Reset and Hardware Testing

ModBus Protocol

General Description and Implementation

Fieldbus Interface

General Fieldbus Notes and Scale Protocol

Function Numbers and Error Codes

Data Exchange Modes

Error Messages

General and Scale-Specific Errors

Calibration and LAST_ERROR Status

Error messages during calibration and status codes in LAST_ERROR.