Minebea CSD-891B - Page 140

126
D F−59 Setting the delay time of returning RS−485
Initial value＝00005 Setting range：00000〜00999
Unit 1 ms
The delay is 999 ms at the “00999” setting.
D F−65 Setting the detection of stability range
Initial value＝00010 00000：Detection of stability OFF
Setting range：00000〜00099
Unit 0.5D
※Effective only when the value from 00001 to 00099 with the F−66
D F−66 Setting the detection of stability time
Initial value＝00005 00000：Detection of stability OFF
Setting range：00000〜00099
Unit 0.1s
※Effective only when the value from 00001 to 00099 with the F−65
D F−72 Setting the effective time for external control input
Initial value＝00000 00000：50 ms
00001：20 ms
00002：10 ms
00003：5ms
00004：2ms
D F−84 Setting the occupied station number of CC−LINK
(Effective when the option is installed)
Initial value＝00002 00000：1 station
00001：2 stations
00002：4 stations
 ● Change the setting of the occupied station number is corresponded to
the software of the instrument after the ROM Ver1.800.
The occupied station number is fixed as 4 before the ROM Ver1.700.
D F−85 Setting the station number of CC−LINK
(Effective when the option is installed)
Initial value＝00001 Setting range：00001〜00061
D F−86 Setting the baud rate of CC−LINK
(Effective when the option is installed)
Initial value＝00000 00000：156 kbps
00001：625 kbps
00002：2.5 Mbps
00003：5 Mbps
00004：10 Mbps
D F−87 Setting of the numeric expression of minus
Initial value＝00000 00000：Expression of standard binary
(−1＝FFFFFFFFH)
00001：At minus, The most significant digit is fixed to “8”.
(−1＝80000001H)