138
Procedures
3
Press the key.
The load display will show “ALOW”.
At the same time, set the weight equivalent to
the minimum output value of the analog output.
4
Press the key.
The load display flashes on and off showing the
present load value.
At the same time, adjust the deviation with the
right keys so the analog output will meet with
the actual weight.
By pressing the key continuously,
increment can be provided continuously.
key ：Decrease the analog output
key ：Increase the analog output
5
Fine adjustment on the maximum value of
analog output
Press the
key.
The load display shows “A_HI”.
At the same time, set the weight equivalent to
the maximum output value of the analog output.
To Next Page
