MINEW Beacon - Default Settings Overview; Default Configuration Parameters; Configuration Mode vs. Deployment Mode; Example: Change Major Parameter

Page 4
Instructions_MiniBeacon
3. Default Settings
Characteristic
Item
Default Settings
Range
0xFFF1
UUID
E2C56DB5-DFFB-48D2-B060-D0F5A
71096E0 (Proximity UUID)
128 bits
0xFFF2
Major
0
0-65535
0xFFF3
Minor
0
0-65535
0xFFF4
Measured Power
-59 (0xC5)
Tips on BeaconSET
0xFFF5
Transmission Power
6 (0dBm)
0-7
0xFFF6
Change Password
minew123
8 characters (Must)
0xFFF7
Broadcasting
Interval
9 (900mS)
1-100
(1-10 Recommended)
0xFFF8
Device ID
Random (Unique serial ID for
0-99999
0xFFF9
iBeacon Name
MiniBeacon_
10 characters (Max.)
0xFFFE
Connection Mode
0: Connectable, configuration
mode. 1: Non-connectable,
deployment mode.
0,1
0xFFFF
Reboot iBeacon
minew123 (it is same as the value
of Change Password)
---
Configuration Mode: It is a factory setting(default); the MiniBeacon can be configured in this mode.
Deployment Mode: The MiniBeacon can’t be configured in this mode, it is non-connectable.
If configured all attributes of MiniBeacon, please change the Connection Mode to
the deployment mode to save battery consumption and enhance the security.
4. Example of changing parameter Major
Step 1: Click Major;
Step 2: Input a new value and then Click Save;
Step 3: Click Reboot iBeacon;
Step 4: Input the default password “minew123” (if you don’t change it before), then Click OK;
Step 5: Beacon will be disconnected with App, please Click Refresh;
Step 6: Check (the new value of Major has been changed);
If you want to change other parameters, please note the Step 3, 4, 5 are the necessary procedures.
5. Deployment Notes
5.1 The broadcasting interval and transmission power level can be changed to increase battery life or
decrease battery life.
5.2 The reference distance is only a reference; the real distance depends on the physical environment.