7 Version 1.3
OPERATING THE CAMERA
HOW TO TURN ON THE CAMERA
1. Your device can be powered on in one of
two ways:
a. Connect your device to an AC
outlet using the provided AC wall
charger.
b. Use the internal battery to power
the device.
2. If you plug the device into an electrical
outlet, the device will power on
automatically and enter into motion
detection mode. The Green light will
blink once and then the Red light will
blink 3 more times and turn off (if
motion is detected immediately). The
device is now in motion detection mode.
3. If you choose to use battery power, point
the remote at the device and press the
power button on the remote. The Green
To Next Page
