Updated 04/23/2018 12 Version 1.0
2. In the “date_time.cfg Creator” window,
select the “SVOS Level” according to
your preferences.
a. Selecting “-2” will cause the
device to only activate when
loud sounds are detected.
b. Selecting “+2” will cause the
device to activate when low
sounds are detected.
c. “0” is the default setting.
3. Make your selection, then press “Start”.
4. Safely eject the device from your
computer, and perform test recordings
to find the perfect setting for your
situation.
RETRIEVE THE FILES TO YOUR PC
To Next Page
Loading...
