6 Version 1.0
IMPORTANT WARRANY INFORMATION: If the
warranty sticker on your device has been removed or
tampered with, your lifetime warranty will be voided.
You may be charged fees or denied a return should this
happen.
HOW TO CHARGE THE CAMERA
Note: If you are not located in the US, or if you intend
to use this product anywhere other than the US, you
will need to purchase a converter in order to use the AC
wall plug in and avoid damaging the product. Because
different countries use different voltages in their
electrical wiring, you will need a converter that adapts
to the current in your particular country.
The OmniSBottle has 2 methods of charging:
1. First, you can connect the provided charging
cable to the battery charging port on the 3D
printed housing inside the bottle (see page 3).
The LED indicator light will be on as long as the
cable is connected. We recommend charging
for 4-6 hours to get a full charge.
To Next Page
Loading...
