Parking lamps/fog lamps/daytime
running lights
Follow the general instructions on Lamps and
bulbs, refer to page 189.
Bulbs:
▷ Parking lamps for halogen headlamps:
W5W
Parking lamps for LED headlamps:
W5W NBV
▷ Daytime running light: PSX24W
▷ Fog lamp: H8
1. Turn the steering wheel.
2. Turn the lid counterclockwise, arrow 2, and
remove.
3. Remove the corresponding connector.
4.
▷ Remove bulb socket of the parking
lamp, arrow 1, by turning it counter‐
clockwise.
Pull the bulb out of the fixture.
▷ Remove the bulb socket of the daytime
running lights, arrow 2, by pressing to‐
gether the top and bottom latch mech‐
anism.
For better accessibility, if necessary, re‐
move the bulb of the fog lamp before‐
hand.
▷ Turn the bulb socket of the fog lamp
counterclockwise, arrow 3, and re‐
move.
5. Insert the new bulbs and install the cover in
the reverse order.
When installing the daytime running lights,
audibly latch the bulb socket first at the
bottom, then at the top.
Tail lamps, bulb replacement
At a glance
Vehicles with a rear fog lamp
1 Side tail lamps
2 Rear fog lamp
3 License plate lamp
4 High brake lights
Seite 192
MOBILITY
Replacing components
192
Online Edition for Part no. 01 40 2 927 905 - II/14
To Next Page
Loading...
Need help?
General
