If car battery voltage below
11.5V, camera can not get
power from OBD ,camera will
be turned off automatically,
Parking Guard function will not
work at the same time, to
ensure the car engine start will
work as normally.
7. POWER SOURCE
The camera can be powered by power lead for cigar lighter socket (standard accessory),
or OBD II cable (optional accessory).
1. Power lead for cigar lighter socket is a easy & fast connecting method for camera, the
only thing you need to do is plug the power lead into the cigar light socket in your car.
The camera will be powered once the engine is start. The advantage of power lead for
cigar lighter socket is it will engage your cigar lighter socket and maybe alignment
difficulty for the long cable.
2. Please connect the car battery with round hole in GPS (bracket) via OBD II cable.
When using parking guard function, camera must use OBD II to get power from car,
don’t use the car charger.
8. MOUNTING
The camera is designed for easy & quick mounting to your windshield with the VHB sticker
pad.
1
st
, mount the camera to the mounting bracket with power cable plugged into either the
mount or camera body;
2
nd
, simulate the unit on your windshield with the camera powered on, rotate the camera
vertically to find the best mounting location;
To Next Page
Loading...
Need help?
General