3rd, clean and dry your windshield, put the film on it. Stick the VHB sticker pad to the
mount bracket or wedges, and attach it in the film to your windshield, hold the mount for a
few seconds to ensure good adhesion;
4
th
, power on the camera and check the camera display again.
When you want to demount the camera, just slide the camera out from the mounting
bracket; no need to take the mounting bracket down.
If you want to change the location, just remove the film, take the camera and bracket
down, it is very convenient.
Please don’t break off the mount bracket from windshield with a rigid crowbar, which may
damage the mount bracket or your windshield.
The recommended mounting location for camera is at the center of the windshield, just
behind the rear view mirror. That is the most invisible location to hide the camera, and will
never interrupt you when driving.
9. PC SYSTEM REQUIREMENTS
Windows XP or later operating system, MAC 10.1
Intel Pentium 4 2.8Ghz CPU or above (recommended 3GHz)
At least 2GB RAM or above (recommended 4GB）
Internet connection (for GPS log playback)
10. UI ICON and STATEMENT
To Next Page
Loading...
Need help?
General