LED ring on the central in-
strument cluster
Concept
The LED ring displays light animations to
represent specific functions.
Basic displays
Basic functions, for instance the tachome-
ter, can be set to be displayed continually if
so desired.
Event displays
Functions that are only displayed tempora-
rily, for instance the volume or temperature
settings, can be set as event displays.
Several vehicle assistance functions can
also be displayed on the LED ring. This dis-
play corresponds with the displays of the
function in the respective display.
Example: tachometer
Like the tachometer in the instrument clus-
ter, the light animations of the tachometer's
basic display show the current RPMs and
the respective RPM warning thresholds.
Display
– Arrow 1: current RPM.
– Arrow 2: prewarning field.
– Arrow 3: warning field.
Switching on/off LED ring
Via the Central Information Display (CID):
1. "My MINI"
2. "System settings"
3. "Displays"
4. "Center Instrument"
5. "Center Instrument"
Adjusting the LED ring
Via the Central Information Display (CID):
1. "My MINI"
2. "System settings"
3. "Displays"
4. "Center Instrument"
5. "Basic display" or "Event display"
6. Select the desired setting.
Setting the brightness
The brightness can be adjusted when night
lighting is active in the instrument cluster.
Via the Central Information Display (CID):
1. "My MINI"
2. "System settings"
3. "Displays"
4. "Center Instrument"
5. "Brightness at night"
6. Turn the Controller until the desired
brightness is set.
7. Press the Controller.
The setting is stored for the driver profile
currently used.
Seite 134
CONTROLS Displays
134
Online Edition for Part no. 01402666575 - VI/19
To Next Page
Loading...
Need help?
General
