Warning
An unsecured vehicle can begin to move
and possibly roll away. There is a risk of
accident. Before exiting, secure the vehi-
cle against rolling.
In order to ensure that the vehicle is se-
cured against rolling away, follow the fol-
lowing:
– Set the parking brake.
– On uphill grades or on a downhill
slope, turn the front wheels in the di-
rection of the curb.
– On uphill grades or on a downhill
slope, also secure the vehicle, for in-
stance with a wheel chock.
Warning
Unattended children or animals in the ve-
hicle can cause the vehicle to move and
endanger themselves and traffic, for in-
stance due to the following actions:
– Pressing the Start/Stop button.
– Releasing the parking brake.
– Opening and closing the doors or
windows.
– Engaging selector lever position N.
– Using vehicle equipment.
There is a risk of accidents or injuries. Do
not leave children or animals unattended
in the vehicle. Take the vehicle key with
you when exiting and lock the vehicle.
Activating drive-ready state
1. Close the driver's door.
2. Depress the brake pedal.
3. Press the Start/Stop button.
Depending on the prerequisite, the electric
drive-ready state is possible or the engine
can be started.
Electric drive-ready state
General information
The vehicle is ready for driving without
starting the combustion engine.
Functional requirement
Electric drive-ready state is possible, if the
prerequisites for electric driving, refer to
page 122, are fulfilled.
Display
READY indicates drive-ready
state.
Combustion engine start
Functional requirements
The combustion engine is started with acti-
vation of the drive-ready state, refer to
page 120, under the following conditions:
– The temperature of the hybrid system is
too high or too low.
– The high-voltage battery has an insuffi-
cient charge.
Driving away
1. Activate drive-ready state.
2. Engage selector lever position D, M/S or
R.
3. Release the parking brake.
4. Drive away.
Seite 120
CONTROLS Driving
120
Online Edition for Part no. 01402628632 - VI/19
To Next Page
Loading...
