Camera
The camera is installed near the interior
mirror.
Keep the windshield in front of the interior
mirror clean and clear.
Turning on/off
Turning on automatically
The system is automatically active when the
vehicle is turned on.
Switching on/off manually
Press button briefly:
– The menu for the Intelligent
Safety system is displayed.
The systems are individually
switched off according to their
respective settings.
– LED illuminates orange or goes out re-
spective to their individual settings.
Adjust the settings as needed. The individ-
ual settings are stored for the driver profile
currently in use.
Press button again:
– All Intelligent Safety systems
are switched on.
– The LED illuminates green.
Hold down button:
– All Intelligent Safety systems are
switched off.
– The LED goes out.
Setting the warning time
The warning time can be set via the Central
Information Display (CID).
1. "My MINI"
2. "Vehicle settings"
3. "Intelligent Safety"
4. "Warning time"
5. Select the desired setting.
The selected warning time is stored for the
driver profile currently in use.
Warning with light braking
function
Display
If there is a risk of collision with a detected
vehicle, a warning light is shown on the
instrument cluster and Head-up display.
Icon Measure
Warning light illuminates red: Ad-
vance warning.
Brake and increase distance.
Warning light flashes red and
acoustic signal sounds: Acute
warning.
Brake and make an evasive ma-
neuver, if necessary.
Prewarning
This prewarning is provided, for instance
when there is impending risk of a collision
or the distance to the vehicle ahead is too
small.
If a prewarning is provided, respond by
braking as warranted.
Seite 165
Safety CONTROLS
165
Online Edition for Part no. 01405A7DAD4 - II/23
To Next Page
Loading...
