Replacing components
Vehicle features and options
This chapter describes all standard, coun-
try-specific and optional equipment offered
with the series. It also describes features
and functions that are not necessarily avail-
able in the vehicle, e.g., due to the selected
options or country versions. This also ap-
plies to safety-related functions and sys-
tems. When using these functions and sys-
tems, the applicable laws and regulations
must be observed.
Onboard vehicle tool kit
Depending on the vehicle equipment, the
onboard vehicle tool kit is located on the
right side under the cargo floor panel or in a
bag on the right side of the cargo area.
After use, secure the bag with the onboard
vehicle tool kit on a lashing eye again.
Wiper blades
Safety information
NOTICE
The window may sustain damage if the
wiper falls onto it without the wiper
blade installed. There is a risk of damage
to property. Hold the wiper firmly when
changing the wiper blade. Do not fold in or
switch on the wiper without a wiper blade
installed.
NOTICE
Folded-away wipers can be jammed when
the hood is opened. There is a risk of dam-
age to property. Make sure that the wipers
with the wiper blades mounted are folded
down onto the windshield before opening
the hood.
Replacing the front wiper blades
1. To change the wiper blades, bring wip-
ers into fold-out position.
2. Fold out and hold the wiper arm firmly.
3. Open the wiper blade lock, arrow.
Seite 283
Replacing components MOBILITY
283
Online Edition for Part no. 01405A7DAD4 - II/23
To Next Page
Loading...
Need help?
General
