Turning on/off
Turning on automatically
The lane departure warning is automatically
activated after departure, if the function
was switched on the last time the engine
was stopped.
Switching on/off manually
Press button briefly:
– The menu for the Intelligent
Safety system is displayed.
The systems are individually
switched off according to their
respective settings.
– LED illuminates orange or goes out re-
spective to their individual settings.
Adjust the settings as needed. The individ-
ual settings are stored for the driver profile
currently in use.
Press button again:
– All Intelligent Safety systems
are switched on.
– The LED illuminates green.
Hold down button:
– All Intelligent Safety systems
are switched off.
– The LED goes out.
Instrument cluster without
enhanced features: display
Indicator light illuminates green: At
least one lane boundary line has
been detected and warnings may be
issued.
Instrument cluster with enhanced
features: display
Indicator light illuminates green: At
least one lane boundary line has
been detected and warnings may be
issued.
Output of warning
If you leave the lane
If you leave the lane and if a lane mark-
ing has been detected, the steering wheel
vibrates.
If the turn signal is switched on before
changing the lane, a warning is not issued.
End of warning
The warning is canceled in the following
situations:
– Automatically after approx. 3 seconds.
– When returning to your own lane.
– When braking hard.
– When flashing.
System limits
Safety information
Warning
Due to its limits, the system may not react,
or it may react too late or in a manner
that is not consistent with normal use.
There may be a risk of accidents or risk
of damage to property. Actively intervene
as warranted. Refer to the information in
this Owner’s Manual regarding the scope
of the system’s operation and limitations.
Seite 171
Safety CONTROLS
171
Online Edition for Part no. 01405A7DAD4 - II/23
To Next Page
Loading...
Need help?
General
