Functional requirements
The system is best used on well-maintained
roads.
The system is functional at speeds begin-
ning at approx. 20 mph/30 km/h.
With the Stop&Go function for Steptronic
transmissions: the system can also be acti-
vated while the vehicle is stationary.
The max. speed that can be set is
85 mph/140 km/h.
Manual transmission: Active Cruise Control
is interrupted below a speed of approx.
20 mph/30 km/h. The system does not
brake to a stop.
If distance control is switched off, refer to
page 185, higher desired speeds can be se-
lected as well.
Turning on/off and interrupting
cruise control
Turning on
Press the button on the steering
wheel.
Instrument cluster without enhanced
features:
Display in the instrument cluster il-
luminates.
Instrument cluster without enhanced
features:
Display in the instrument cluster il-
luminates. The current speed is adopted as
desired speed and displayed with icon.
Instrument cluster with en-
hanced features:
Display in the instrument
cluster illuminates. The cur-
rent speed is adopted as de-
sired speed and displayed with icon.
Cruise control is active and maintains the
set speed.
If necessary, the Dynamic Stability Control
will be turned on.
Turning off
With the Stop&Go function for Steptronic
transmissions: when switching off while
stationary, depress the brake pedal simulta-
neously.
Press the button on the steering
wheel.
The displays turn off. The stored set speed
is deleted.
Interrupting manually
Press the button on the steering
wheel.
With the Stop&Go function for Steptronic
transmission: when interrupting while sta-
tionary, depress the brake pedal simultane-
ously.
Interrupting automatically
The system is automatically interrupted in
the following situations:
– When braking manually.
– Manual transmission: when the clutch
pedal is depressed for a few seconds or
released while a gear is not engaged.
– If selector lever position N is set.
– When Dynamic Traction Control is ac-
tivated or Dynamic Stability Control is
deactivated.
– If Dynamic Stability Control regulates
the driving stability.
– If the detection range of the camera is
impaired, for instance by contamination,
heavy precipitation or blinding glare
from the sun.
Seite 183
Driving comfort CONTROLS
183
Online Edition for Part no. 01405A7DAD4 - II/23
To Next Page
Loading...
Need help?
General
