9 Maximum cooling
10 Air conditioning
11 Air recirculation mode
12 Rear window defroster
13 Heated windshield
14 To defrost windows and remove conden-
sation
15 Seat heating, left 83
Climate control functions in detail
Switching the system on/off
Turning on
Set any air flow.
Turning off
Turn wheel for air flow to
the left until the control panel
switches off.
Temperature
Principle
The automatic climate control achieves the
set temperature as quickly as possible, if
necessary by using the maximum cooling or
heater output, and then keeps it constant.
Adjusting
Turn the wheel to set the de-
sired temperature.
Do not rapidly change between different
temperature settings. The automatic climate
control will not have sufficient time to ad-
just the set temperature.
Air conditioning
Principle
The air in the interior will be cooled and
dehumidified and, depending on the temper-
ature setting, warmed again.
Functional requirement
The car's interior can only be cooled with
the engine running.
Turning on/off
Press the button.
The LED is illuminated with air con-
ditioning switched on.
Depending on the weather, the windshield
may fog up briefly when the engine is
started.
Air conditioning is switched on automati-
cally with the AUTO program.
The cooling mode produces condensation,
refer to page 237, that will exit from below
the vehicle.
Maximum cooling
Principle
The system is set to the lowest tempera-
ture, maximum air flow and recirculated-air
mode.
Functional requirement
The function is available at outside temper-
atures above approx. 32 ℉/0 ℃ and with
the engine running.
Seite 207
Climate control CONTROLS
207
Online Edition for Part no. 01405A7DAD4 - II/23
To Next Page
Loading...
Need help?
General
