General information
To adjust the air flow manually switch off
AUTO program first.
Adjusting
Turn the ring to set the de-
sired air flow.
The manually adjusted air flow is displayed
via illuminated LED segments.
The air flow of the automatic climate con-
trol may be reduced to save vehicle battery
power.
Manual air distribution
Principle
The air distribution for climate control can
be adjusted manually.
Adjusting
Press the button repeatedly to se-
lect a program:
– Windows, upper body area, and footwell.
– Upper body area and footwell.
– Footwell.
– Windows and footwell.
– Windows.
– Windows and upper body area.
– Upper body area.
To defrost windows and remove
condensation
Principle
Ice and condensation are quickly removed
from the windshield and the front side win-
dows.
Turning on/off
Press the button.
The LED is illuminated with the
system switched on.
The air flow can be adjusted with the pro-
gram active.
If there is window condensation, switch on
the air conditioning as well.
Heated windshield
Press the button. The LED illumi-
nates.
The heated windshield switches off auto-
matically after a certain period of time.
Rear window defroster
Press the button. The LED illumi-
nates.
The rear window defroster switches off au-
tomatically after a certain period of time.
When GREEN driving mode is activated,
the heater output is reduced.
Microfilter/activated-charcoal filter
In external and recirculated-air mode, the
microfilter/activated-charcoal filter filters
dust, pollen, and gaseous pollutants out of
the air.
Have this filter changed during vehicle
maintenance, refer to page 281.
Ventilation
Setting
The air flow directions can be individually
adjusted:
– Direct ventilation:
Seite 209
Climate control CONTROLS
209
Online Edition for Part no. 01405A7DAD4 - II/23
To Next Page
Loading...
Need help?
General
